← Back

ZOLUXPRO · CNC

Theoretical turning surface finish

Enter your known values. Results and formulas update instantly.

feed frε
Approximate Ra1.5625 µmApproximate scallop height6.25 µmExact circular scallop height6.2746 µm
Ra ≈ f²/(32r); h ≈ f²/(8r); h = r − √(r² − (f/2)²)

Interpretation and limits

Ideal circular-nose imprint model; not directly applicable to wiper inserts. Ra and approximate height assume feed small relative to radius. Circular height checks the approximation; it is not measured Ra or certification of standard Rz/Rt. Vibration, wear and material affect actual finish. Use the drawing’s inspection method.

Example: f = 0.2 mm/rev and r = 0.8 mm give Ra ≈ 1.5625 µm, approximate height 6.25 µm and circular height ≈ 6.275 µm.

Sandvik Coromant · Nose radius and feed